EeZeBilt 50 PT Boat

georgeo5664 #2 of 2 há 12 anos

This is my very first boat I have ever built. I have choose this boat because it has a nice look about it.
it might be easy but for my first build I wanted to understand the different parts to a boat and how things go together.

Gostado por georgeo5664

georgeo5664 Mensagem de abertura há 11 anos

EeZeBilt 50 PT Boat

Just managed to get the hull ready next step the top any advice on what motor and prop / prop shaft would be ok running in this boat the boat it about 30" long any help would be appreciated

13 comentários

DodgyGeezer
Tenentehá 11 anos
No trouble. I hope it should be easy to skin the hull, and the basic superstructure isn't very complicated.

Install the propshaft and motor, with its connector, while the hull in unskinned.

Then do the bottom of the hull, and install the rudder, the shelf and servo. At that stage you should be able to set up your radio and make the motor run and the servo turn.

Then skin the hull sides. You do those last because working on the rudder will be difficult when they are on!

Good luck...
Gosto
georgeo5664
Primeiro-sargento marítimohá 11 anos
Dodgygeezer I have been looking at the build log and you are right I have removed and reinstalled the stern to touch the back of the deck thanks for you observation it looks a lot better now. 😀
Gosto

Iniciar sessão to comment on this update.

MODEL BOATS WEBSITE

EeZeBilt 50 PT Boat

Seguidores (2)

EeZeBilt 50 PT Boat

EeZeBilt 50 PT Boat