Thanks Paul, just had a look and he does all that is required. 👍

I new you would come up with the answer once you woke up 😁

Alan

barrys model lettering,

wherever you get them, make sure you have the depth markings, and the extra number for the rear, some suppliers "forget" these! 😟

Asleep!!! huh!!

Work hard? Well someone has to pay the taxes to keep all you pensioners in model boats!

My post was in before you Alan 😛

Thanks guys, learn something new every day
Roger

Roger, I think Ian has fallen asleep, well the poor fellow does work hard 😁 so I will answer.

We both make our own decals, mainly to go on our fast electric boats, anything that you can print on your home printer can be made into a decal.

Paper and instruction here.
http://www.craftycomputerpaper.co.uk/.-Inkjet-Water-Slide-Decal-Paper_151.htm

The reason for not using this on the crash tender is that they really need a coat of lacquer after been put on the boat and I didn't want to do that.

But be careful if you go down this route, you can end up with all sorts of daft things on your boat 😁

Grace, who is titch? doesn't happen to be a big fella does he 😁

Alan

I design the decal on the pc, then make the decal with paper from here:



http://www.craftycomputerpaper.co.uk/productlist.aspx?searchstring=decal%20paper

It works very well as long as you follow the instructions carefully.

Ian

try machinary decals..fella called titch..........very helpful chap

Alan, I hear that KitShack are now making decals forttheir 34'' boat maybe they would sell a set
Roger

HI Ian, how do you make your own?
Roger

HI Model Flags do them for a 46in fireboat I dont know if they do them for a 34in you could have look on line or give them a ring

Why not make your own Alan?

Ian