small servo's

Iniciado por jacko há 8 anos

3 replies 3 gostos 0 seguidores Última atividade: há 8 anos

small servo's

thanks bike spokes looks / sounds great but then found out a 1.6mm drill works ok this morning as a 1.5 was tight,, drilled holes 1 3 5 one side and 2 4 the other thanks for all input

Gostado por RNinMunich

#3 há 8 anos

small servo's

Agree with Doug. I use bicycle wheel spokes. Got an old wheel from my local bicycle shops scrap pile for free.
Got enough rods now for the rest of my life!

Gostado por RNinMunich

#2 há 8 anos

small servo's

Hi Jacko,
So what's the problem!?😉
Drill out the servo arms to match.
Or; forget the clunky commercial clevis pins and simply make a push rod from spring steel rod. Don't let the manufacturers dictate to you!!
Use your imagination; and a couple of pairs of pliers 😁
Cheers, Doug 😎

Young at heart 😉 Slightly older in other places.😊 Cheers Doug

Gostado por Donnieboy

#1 há 8 anos

small servo's

just got some of the micro servo's for a small boat can somebody point me to a suppler of clevis joints as the standard one's are to large and the pins are to large to go through the holes in the servo arms

Iniciar sessão para acrescentar a este tópico.

MODEL BOATS WEBSITE

small servo's

small servo's

small servo's

small servo's

small servo's