Well, after the lovely reception of my HMCS Snowberry - which has been in the wars after a collision, now repaired and upgraded - now with a smoker and lighting - I chanced upon another 1/72 Revell Corvette, so taking everything I had learned in making Snowberry, I thought I would apply myself and see what I could do for a sister ship - the part-built kit - an eBay find - came with a few options for the decals, one of which was HMS Campanula, so the task was set!

Campanula has some differences to Snowberry, a diferent radar tower, different bridge supports - 2 x beams instead of 3 - different layout to the carley floats, an extra flagstaff on the funnel and a diferent bandstand edging for the rear pompom, so some scratchbuilding to fashion the diferences, as well as replacing a few missing parts.

The pics show it as it arrived, then the scratchbuilt carley float supports, the whaleboat runout on the davits, the bandstand alteration, the upgraded front gun, flota nets, navi and interior lights and an overview of the progress...

I am hoping to have her finished this week, and the crew painted and affixed, ready for her maiden voyage at Bury Lido next Sunday, fingers crossed!

Anyhows, hope you like her!

On the weekend spotted a yard sale . The older gentleman had restored a model he had built but the cat got to it . So because of his age he had decided to no longer have a hobby . We talk about model boats & stuff & he gave the wood to me & the 3 models . Future Build blog projects Maybe but wood is always handy to have in case power goes out.

The local Fox TV channel contacted us and told us they'd like to do a short feature on us.
The time allotted was short, but I think we did a nice job representing our hobby.
Hopefully this may create more interest in the local community!
Here are links to the 3 segments they aired:

In the last few seconds of the video you can see her jerk a couple times. Took a big fish strike. Bent the rudder pushrod bad. Lost a crew member figure lol. Not the best maiden voyage.Took about 15 minutes to retrieve her. Now have a fiberglass reinforced pushrod. Just part of the fun in this fantastic hobby!

Re the:- Model Framing Jig from jbkiwi .

Seeing the time and effort other people put into their modelling hobby, and looking at the "build blogs" and forum comments on "Model Boats Website". I was prompted to share (with agreement) a couple of build (logs) blogs which would reach a wider audience via my youtube posts.
The intention is just to supplement and acknowledge ideas from all who share this common interest.
No monitorisation is received from this or any postings.
Other Ref:- RC Sailing:- No.154 Nordkap & RC Sailing:- No.162 Racing Sparrow

Just a quick update with the new camera boat before fitting and running with the Gopro attached.
Observations :-
1. Maneuverability - Great - but better control with high and low rate options!.
2. Speed - Too much ? - may be , but enough for me to throttle back quickly !.
3. Camera - Good balance and rotation for 360*.
4. Cost - Minimal - ie. Motor & ESC kit from Hobbybitz.
5. Noise - 5/10
6. Fun Factor - 10/10 - just for fun ! - enjoy RC Sailing !.

NOTE - I would be interested to know of any theories in respect of the "PULSING NOISE" of the motor ?????
Cheers
Phil

Once again our intrepid members meet at Josey Ranch in Carrollton Texas to have fun, give each other a hard time and promote the hobby of model boating. 😀

22" L, 4" B
Flashhobby 2300kv outrunner
30A emax brushless
7.4-11.1v
Weighs about 950 grams.

GoPro session

This is my first scratch build. I used hand tools and a jig saw to cut out the frame. and bulk heads. Keel and frame was cut out of plywood and the rest. of the boat is balsa. I out fitted with parts from various pieces I had pick up at hobby shops and suppliers online. The pilot house, stack and skylight is all hand made with wood and polystyrene fittings.
I downloaded the plans, altered the scale size and printed the hull and boat to scale. Again this was the first and I now am looking forward to another project.

Finally had a chance to do a test on Pilot 40 project that was my lockdown stay home project . Change the props to 50 mill.4mill.threaded & now I have right prop & left prop Replaced the Sabertooth speed control as it was to hard to control with my Airtronics transmitter used a standard Hobby King speed control changed the wiring terminal block to a larger size as the one I first used was to hard to put wires in it . I always have trouble with mounting so glued the motors in with some goop & there just fine now

Fitted the new 550 45T brushed motor as a replacement for the ancient and slow 70s Graupner monoperm. Goes a lot better now and has a decent speed range. Handles and rides quite well for a skinny boat. Prop is a Graupner 40mm 2 blade (don't know the pitch, -fairly fine) Using a 2200mAh 2S LiPo battery which probably gives around an hours running slowly, or 30 mins of hooning around.

Battery was only charged to 8.25v and ended up at 7.7v. (45%) after about 3/4 hr. I'll probably fit a Hobbywing ESC as well, for a bit better reverse action, as the El cheapo car one is a bit slow finding reverse at times.

My Airtronics Radio broke down , the aerial got snapped off my bad so converted some of my R/C models to a 2.4 g Hobby King So here's a test run .P/S started to learn how to add a little audio also .