Comentários

Iniciar sessão para comentar.

1. ChrisF🇬🇧Bronze

   Almirante·há 4 meses

   That's OK as long as you don't use it very often and it dries out properly. Water may be getting into the hull timbers, but not showing on the inside, and could lead to rot.
   
   If you want to maintain the history and patina probably best kept as a display model only.
2. Stephen T🇬🇧Gold

   Capitão·há 4 meses

   @Ronald ill leave it along once you get to survive since June 1954 you are allowed a few cracks all part of its charm

   Gostado por Ronald and hermank Ver tudo
3. Ronald🇨🇦

   Almirante da Frota·há 4 meses

   @Stephen T
   
   I would leave it alone, you’re not gonna see the paint cracks from shore. No leaks are good!
   
   If left alone, people will be seeing it as an original.

   Gostado por hermank and chugalone100 Ver tudo
4. Stephen T🇬🇧Gold

   Capitão·há 4 meses

   according to him his advice was to take it all off looked like the paint has broken down

   Gostado por chugalone100 and Ronald and 1 other
5. Ronald🇨🇦

   Almirante da Frota·há 4 meses

   @Stephen T
   
   What did the paint specialist say about it?

   Gostado por chugalone100 and hermank Ver tudo
6. ChrisF🇬🇧Bronze

   Almirante·há 4 meses

   The paint looks to be quite thick and given the extent of the cracking you need to take most if not all of it off otherwise the problem could reoccur before too long.
   
   As it's timber you could use paint stripper though the modern versions don't appear to be as effective. Otherwise start off with a coarse grit until you remove the layers of gloss and then take it easy. If the primer/undercoat is sound then you could repaint from there (undercoat first) after a finer sanding. If not sound, sand all the way back to bare wood. If it is plank on frame it would be a good idea to use lightweight cloth and say Eze-Kote to provide a stable base for painting.
   
   You need to start getting that paint off though first so that the situation can be assessed.

   Gostado por DWBrinkman and chugalone100 and 1 other
7. Stephen T🇬🇧Gold

   Capitão·há 4 meses

   here is the problem the whole paint work is cracking do I take the whole thing right back or just leave it as it is dosent leak

   Gostado por chugalone100 and hermank Ver tudo
8. Ronald🇨🇦

   Almirante da Frota·há 4 meses

   @DWBrinkman
   
   Probably a light sanding will be required with 220 grit before any painting or finish would be done.
   
   Sand across, not up and down.

   Gostado por chugalone100 and hermank Ver tudo
9. DWBrinkman🇺🇸Bronze

   Contra-almirante·há 4 meses

   Sharp looking boat!
   I hope you find a solution to the paint problem.
   It isn't probably the easiest, but I think I'd try to strip/sand it down to wood and repaint. Then you know what you have .... But, that's just me.
   Dave B

   Gostado por chugalone100 and Ronald and 1 other
10. Stephen T🇬🇧Gold

    Capitão·há 4 meses

    yes it is from that date ill look into that idea we have a specialist paint shop nearby

    Gostado por DWBrinkman and Ronald and 1 other