SEMI SCALE 1953 EDSON SCHOCK 15FT DAY SAILER
Especificações
- Comprimento do barco
- 32" (81.28 cm)
- Peso do barco
- 206g (7 oz)
Fotos
Sobre este barco
Model is made from polystyrene foam, shaped and f/glassed with a ply deck and ply lined cockpit and ply transom. Uses a HiTec winch with a floor mounted sheet hauler pulley system.
The skipper is servo powered and ducks under the boom when tacking
Gostado por
A carregar…
Comentários
Iniciar sessão para comentar.
Look for this in the build blog search. Basically, I cut the figures' torso down to enable him to move to horizontal (by gravity) then he's hauled back upright by a servo at the front end of the seat pulling on a cord (with a spring strain relief) round a pulley under his butt and attached to a servo horn implanted in the same area (you can see it in one of the pics) Vid of him working and detail pics here-
SEMI SCALE FOAM AND GLASS MODEL OF MY 15FT 1953 SCHOCK US DESIGN DAY SAILER. CREW ADDED
JB
Unfortunately the model skipper only ducks the boom (that was a mission in itself). Would have been nice to have him change sides, but not really feasible due to the lack of room and the mechanism needed. I had the Idea for my cat skipper to change sides, but that was also too complicated.
JB
😊
Great end resalt, she looks very realistic on the water.
Cheers,
Stephen.
Your day sailor, except for its length is a copy of the Heron dinghy in the UK, designed by Jack Holt in about the 1950's. I still have my orignal gaff-rigged Heron built in about 1958, but sadly just stored in my garage.