Directório do porto
Dutch Towing Barge
Fotos
Sobre este barco
This is probably my favourite 3D printed boat. Files are from Thingiverse and by "Tinkerman".As the inside of the hull is very shallow, I was unable to install a conventional drive. After much deliberation I decided to use a bow thruster. I purchased the smallest I could get (12mm) and hung it underneath, it works really well.
The original barge nowadays acts as a tourist attraction and has been somewhat adapted to be used to show people around the canals, the old city of Coevorden and former peat grounds of the Northern provinces of The Netherlands. Originally it was an almost empty hull (see original pictures) that was filled up with cargo, mostly peat, and that had some benches to transport people as well. Extract from Tinkermans write up. See photo's of original.
The original barge nowadays acts as a tourist attraction and has been somewhat adapted to be used to show people around the canals, the old city of Coevorden and former peat grounds of the Northern provinces of The Netherlands. Originally it was an almost empty hull (see original pictures) that was filled up with cargo, mostly peat, and that had some benches to transport people as well. Extract from Tinkermans write up. See photo's of original.
Gostado por
A carregar…
Comentários
Iniciar sessão para comentar.
I think a 3D printing blog would benefit quite a few members.
Maybe you could include the use of the slicing software and explain how you cut the part in to manageable sections.
Martin555.
Rick
Where's he gonna put all that rubber!?😁🤣
😎
I believe that there are several members teetering (with trepidation😐) on the brink of buying a 3D printer. And as you say hundreds gathering dust for lack of guidance🤔
Mine isn't though. 😉
It's in the cellar wrapped up in a bin bag 🤔 since the last big workshop sort-out a year or so ago. Due again now.
You seem to have mastered the art so I reckon your blog would be welcomed👍
Cheers, Doug 😎
So your concern is that 3d printers will take over model boat building, I think that will not happen because I secretly believe there are hundreds of 3d printers gathering dust in garages and workshops all over and I would not like to existing methods disappear. Me, I spent my whole working life resolving technical and innovation problems so 3d printers are a challenge. For every item I have printed I would say 3 have been binned. As example, recently my 12 year old granddaughter asked me to print her a dragon necklace (from the Game of Thrones),of course I said.The final print took 12 hours plus 6 hours cleaning it up, plus 36 hours of printing failures.Unless you buy a commercial printer or a very top end diy one the success rate is not great. Perhaps if there's interest I could do some kind of blog on 3d printing. cheers Paul
I just hope that it doesn't completely supersede all other building techniques though Nerys.
So many skills which might disappear for ever☹️
😎
Nerys
An inner tube with the motor and shaft on the inside of the outer tube, then as long as both tube tops are above the water level it should be ok.
If you like i can draw something out for you if it will help.
Martin555.
the bow thruster is static and steered by the rudder. The problem with a moving bow thruster for me would be waterproofing. Thanks for the comment.
Cheers Paul👍